Блог компании 75K Logic Cells — Mingjiada's Brand-New and Original Supply of Xilinx Artix-7 XC7A75T-2FGG484I FPGA Chip

Shenzhen Mingjiada Electronics supplies brand-new, genuine AMD (Xilinx) Artix-7 series mid-range FPGAs with high cost-performance: XC7A75T-2FGG484I. Directly sourced from the manufacturer with guaranteed stock availability and bulk delivery, it is an ideal choice for industrial control, communications, machine vision, embedded computing, and other applications.

I. Core Product Overview: The Cost-Effective Choice in the Artix-7 Family

The XC7A75T-2FGG484I is a mid-to-high-end model within Xilinx's Artix-7 series. Built on a 28nm High-K Metal Gate (HKMG) low-power process, it delivers exceptional performance while achieving significant reductions in static power consumption. This device is optimized to meet diverse system requirements—from low-cost, compact, high-volume applications to those demanding high-bandwidth connectivity, extensive logic capacity, and signal processing capabilities.

Model naming convention breakdown:

XC7A75T: Indicates the Artix-7 series with approximately 75,000 logic cells; suffix “T” denotes support for high-speed serial transceivers

-2: Speed grade -2, representing a balanced performance-to-power ratio

FGG484: 484-pin FBGA (Fine-Pitch Ball Grid Array) package, dimensions 23mm x 23mm

I: Industrial temperature range (-40°C to 100°C), suitable for harsh industrial environments

II. Core Specifications

Core specifications for the XC7A75T-2FGG484I are as follows:

Basic Information

Model: XC7A75T-2FGG484I

Series: Artix-7

Process: 28nm CMOS

Package: FCBGA-484 (23×23mm)

Speed Grade: -2

Temperature Grade: Industrial (I)

Logic Resources

Logic Elements (LE): 75,520

Adaptive Logic Modules (ALM): 11,800

DSP Slices: 210

Maximum Computational Power: 315 GMAC

Memory Resources

Block RAM: 3,780 Kbit (3.69Mb)

Distributed RAM: 892 Kbit

External Memory Support: DDR3-1066

High-Speed Interfaces

High-Speed Transceivers (GT): 4 channels

Single-Channel Rate: 6.6 Gbps

Total Serial Bandwidth: 211 Gb/s

Supported Protocols: PCIe Gen2, SATA, Ethernet

I/O Resources I/O Count: 285

I/O Voltage: 1.2V–3.3V

Supported Standards: LVCMOS, LVDS, differential I/O, etc.

Electrical Parameters

Core Voltage (VCCINT): 0.95V–1.05V

Operating Temperature: –40°C to +100°C

Maximum Junction Temperature: 100°C

III. XC7A75T-2FGG484I Core Technical Features

1. Optimized Low-Power Architecture

XC7A75T-2FGG484I Based on 28nm HKMG process technology, the Artix-7 series delivers industry-leading low static power consumption while maintaining high performance. The device supports multiple low-power modes, making it ideal for high-volume, cost-sensitive applications where power efficiency is critical.

2. Flexible Block RAM Resources

XC7A75T-2FGG484I Integrates 105 blocks of 36Kb dual-port block RAM, each configurable as two independent 18Kb RAMs. Built-in FIFO logic supports on-chip data buffering, eliminating the need for external FIFO chips, with a maximum operating frequency of 1,818 MHz.

3. Extensive DSP Processing Capabilities

XC7A75T-2FGG484I Integrates 180 DSP Slices, each containing a 25x18 multiplier, 48-bit accumulator, and pre-adder. Supports high-performance filtering and symmetric coefficient filtering to meet communication and industrial signal processing requirements.

4. High-Speed Serial Connectivity

XC7A75T-2FGG484I Supports transceiver rates up to 6.6 Gb/s, delivering a total serial bandwidth of 211 Gb/s. Ideal for chip-to-chip, backplane, and fiber optic communications, meeting high-speed data transmission demands in industrial cameras, communication equipment, and similar applications.

5. Integrated PCIe Hard Core

XC7A75T-2FGG484I Features a built-in PCI Express® Gen2 module supporting x4 endpoint and root port configurations, simplifying high-speed interface design with processors or system buses.

6. Robust Clock Management

XC7A75T-2FGG484I Equipped with a mixed-mode clock manager (MMCM) and phase-locked loop (PLL) for high-precision, low-jitter clock generation and frequency synthesis.

7. Flexible Memory Interface

Supports DDR3/DDR3L memory interfaces up to 1,066 Mb/s, meeting embedded systems' requirements for high-speed external storage.

8. Extensive I/O Standard Support

I/O voltage support ranges from 1.2V to 3.3V, compatible with multiple I/O standards including LVCMOS, LVDS, SSTL, and HSTL, facilitating connection to various peripheral devices.

IV. Typical Application Areas

The XC7A75T-2FGG484I, with its high cost-performance ratio, low power consumption, and industrial-grade reliability, is widely used in the following scenarios:

Industrial Automation

Communications Infrastructure

Medical Imaging

Test and Measurement

Defense and Aerospace

Automotive Electronics

For real-time pricing, sample requests, or bulk inquiries regarding the XC7A75T-2FGG484I, please contact Mingjiada Electronics' sales team anytime!

Contact: Mr. Chen / Sales Team

Mobile: +86 13410018555

Email: sales@hkmjd.com

Address: Room 1239-1241, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province

Official Website: www.integrated-ic.com