Блог компании Mingjiada Supply ADI ADP1765-ADJ-EVALZ Evaluation Board: Evaluate The Functional Characteristics Of The ADP1765 CMOS Linear Regulator

Mingjiada Supply ADI ADP1765-ADJ-EVALZ Evaluation Board: Evaluate The Functional Characteristics Of The ADP1765 CMOS Linear Regulator

Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supplier of the ADI evaluation kit ADP1765-ADJ-EVALZ: designed to demonstrate the functional characteristics of the ADP1765 linear regulator. Product details for the ADP1765-ADJ-EVALZ evaluation kit are as follows:

ADP1765-ADJ-EVALZ adjustable evaluation board demonstrates the functional characteristics of the ADP1765 linear regulator.
Requiring only a single voltage source, voltmeter, ammeter, and load resistor, the ADP1765-ADJ-EVALZ enables measurement of fundamental device parameters including line regulation, load regulation, dropout voltage, and quiescent current.
ADP1765-ADJ-EVALZ provides an output voltage range of 0.5 V to 1.5 V. The output voltage can be set to 1.0 V via an external 6.8 kΩ adjustment resistor.

ADP1765-ADJ-EVALZ Adjustable Evaluation Board:

Product Model: ADP1765-ADJ-EVALZ (Evaluation Board)
Current - Output: 5A
Regulator Type: Positive, Adjustable
Contents: Board
IC/Parts Used: ADP1765

ADP1765-ADJ-EVALZ Product Features:
Full-featured evaluation board for the ADP1765
Input Voltage Range: 1.10 V to 1.98 V
Output Current Range: 0 mA to 5 A
Evaluates adjustable or fixed output voltages
Test points facilitate electrical measurements
Operating Temperature Range: -40°C to +125°C

ADP1765-ADJ-EVALZ Output Voltage Measurement Setup:

ADP1765-ADJ-EVALZ Core Chip Details (ADP1765):
ADP1765 – 5 A, Low VIN, Low Noise, CMOS Linear Regulator
The ADP1765 is a low-noise, low dropout (LDO) linear regulator. It operates from a single input supply as low as 1.10 V, eliminating the need for an external bias supply to improve efficiency, and delivers up to 5 A of output current (IOUT).
The ADP1765 exhibits a low dropout voltage of 59 mV (typical, 5 A load), enabling operation with minimal headroom while maintaining regulation and delivering higher efficiency.
Optimised for stable operation with a compact 22 μF ceramic output capacitor, the ADP1765 delivers excellent transient response performance while occupying minimal printed circuit board (PCB) area.
The ADP1765 offers fixed output voltages ranging from 0.55 V to 1.5 V. For the adjustable output variant, the output voltage (VOUT) can be set between 0.5 V and 1.5 V via an external resistor connected between VADJ and ground.
ADP1765 Specifications:

Number of Regulators: 1
Voltage - Input (Max): 1.98V
Voltage - Output (Min/Fixed): 0.5V
Voltage - Output (Max): 1.5V
Current - Output: 5A
Current - Quiescent (Iq): 17 mA
Current - Supply (Max): 25 mA
PSRR: 61dB ~ 33dB (10kHz ~ 1MHz)
Control Features: Enable, Power Good, Soft Start
Protection Features: Current Limit, Thermal Overload
Operating Temperature: -40°C ~ 125°C (TJ)
Mounting Type: Surface Mount
Package / Case: 16-WFQFN Exposed Pad, CSP
Supplier Device Package: 16-LFCSP (3x3)

【Mingjiada Electronics】offers the ADI evaluation board ADP1765-ADJ-EVALZ on a long-term basis. For further product information regarding the ADP1765-ADJ-EVALZ or to enquire about samples, please visit the Mingjiada Electronics official website (https://www.integrated-ic.com/) for additional supply details.